Wuxi Sinoprs Ecotech Co., Ltd
Wuxi Sinoprs Ecotech Co., Ltd- Quality and customer first
Add to Cart
wastewater treatment systems and operations
The coagulation area of this series of water purifiers adopts a star-shaped mixed reaction process. The precipitation area adopts a double-layer differential flow inclined pipe structure. The filtration area adopts a combined backwashing method of external gas and water, which is very suitable for complex water quality conditions. Coupled with automatic dosing device and disinfection equipment, it can become a water purification station (factory) with a full set of functions.
This series of water purification devices not only have a wide range of applications, good treatment effects, and excellent effluent quality, but also have small self-consumption, low power consumption and small footprint. It saves water, electricity and labor, and can completely replace traditional small and medium-sized water plant equipment.
|
Inlet water pressure |
≥0.1Mpa |
Design surface load of sedimentation zone |
5~8m³/m2.h |
|
Applicable raw water temperature |
5~40℃ |
Design filter speed of filter area |
8~10m/h |
|
Suspended substance content limit of inlet water |
≤3000mg/L |
Filter washing intensity (water washing) |
10~15L/m2.s(T≈5min, ) 10~15L/m2.s(T≈5min, adjustable) |
|
Suspended substance content in purified outlet water |
≤3mg/L |
Filter washing intensity (air washing) |
10~15L/m2.s(T≈5min, ) 10~15L/m2.s(T≈5min, adjustable) |
|
Total retention time |
60~70min |
Filter material (quartz sand) |
0.6-1.2mm,1000-1400mm Particle size 0.6-1.2mm, pile thick 1000-1400mm |
List of corollary equipment
| Model |
(t/h) Water production |
(mm) Inlet water pipe
|
(mm) Produced water pipe |
(mm) Water discharge pipe
|
(mm) Sludge discharge pipe |
Pump (feed water) |
(KW) Pump power |
Equipment weight |
Operating weight |
| FS-10 | 10 | DN50 | DN80 | DN200 | DN150 | IS50-32-125A | 2.2 | 7 | 27 |
| FS-30 | 30 | DN80 | DN125 | DN200 | DN150 | IS80-65-125A | 5.5 | 12 | 72 |
| FS-50 | 50 | DN125 | DN150 | DN250 | 2×DN150 | IS80-65-125A | 5.5 | 21 | 121 |
| FS-100 | 100 | DN150 | DN200 | DN300 | 3×DN150 | IS150-125-250C | 11 | 42 | 242 |
| FS-125 | 125 | DN150 | DN200 | DN300 | 4×DN150 | IS150-125-200B | 15 | 52 | 277 |
| FS-150 | 150 | DN200 | DN250 | DN350 | 4×DN150 | IS150-125-200A | 15 | 78 | 328 |
| FS-200 | 200 | 2×DN150 | 2×DN200 | 2×DN300 | 6×DN150 | IS200-200-250C | 22 | 104 | 508 |
| FS-300 | 300 | 2×DN200 | 2×DN250 | 2×DN350 | 8×DN150 | IS150-125-200C | 22 | 156 | 712 |
1上述
1 The direction of the inlets of the various pipelines can be changed by 180 degrees to meet the needs of the overall layout.
2.Pump type selection and motor power are only reference values (H≤15m), and the required operating parameters should be determined according to the actual engineering conditions on site.